LeCroy Oscilloscope
Coherent Solutions
ODA(Power/ Load)
제전기 ( IONIZER )
▶AC / DC 전원공급기
▶신호 / 함수 발생기
▶LCR 미터
GWINSTEK > 오실로스코프
GDS-1000A Series
1GS/s - 25GS/s

GDS-1000A Series




- 1/ 100/ 60MHz 주파수대역,2채널

- 1GS/s 실시간 샘플링 및 25GS/s 샘플링

- 2Mega 포인트  뛰어난 메모리

- 2mV~10mV 광대역 수식 스케일

- 1ns ~50s 광대역 수평 범위

- 27가지의 자동 측정 파라미터

- 파형 연산 Math+,-,,FFT,FFTrms기능

- 5.6인치 컬러 TFT-LCD 디스플레이

- USB 인터페이스,SD카드 저장매체

- PictBridge프린터 지원 및 Free S/W

- 다국어지원 및 온스크린 도움말


제품상세 설명



The GDS-1000A series provide a unique solution. The GDS-1000A covers GDS-1152A, GDS-1102A

and GDS-1062A three models. Operating at 150, 100 or 60 MHz with a real-time sampling rate of 1GSa/s, the GDS-1000A employs MemoryPrime technology (more detail please visit www.Memory-Prime.com). Using MemoryPrime technology, the GDS-1000A is able to overcome the problems associated with memory constraints. Unlike traditional DSOs, high sample rates can be maintained over longer periods of time, without effecting performance.


Coupled with the high resolution, 5.6” color TFT display, SD memory card support, user-friendly interface and USB remote control make the GDS-1000A series compellingly feature-rich. Furthermore, the GDS-1000A series provide a lifetime warranty program!






PictBridge Printer Supported


The GDS-1000A is one of the few DSOs currently on the market that can provide complete remote control or data capture over a USB interface. The GDS-1000A Series also supports PictBridge, allowing you to print directly to your printer without complex configuration. After connecting to a PictBridge compatible printer with a USB cable, printing is as easy as pressing a button.



Fast Horizontal Position Mark and Search


MemoryPrime technology allows a maximum of 2M points of waveform data. For engineers, analyzing a considerable amount of data can be an extremely challenging task. To assist engineers in analyzing waveforms quicker, we provide Horizontal Page Skip and Set Time Mark functionalities . This lets engineers take full advantage of the 2M memory depth. 



Auto Measurement Gating


A built-in Autoset function on a digital oscilloscope gives engineers remarkable convenience. With the complexities of product features, traditional auto measurement information is inadequate for modern

measurement needs. The new Cursor Gating feature allows you to mark an area with cursors for auto measurement.




Flexible Probe Factor Setting


There is a diverse range of test probes currently on the market such as passive, differential, and electrical probes. The attenuation ratio of each probe type also differs greatly. To ensure compatibility, probe attenuation ratios of 0.1X to 2000X as well as voltage and current probes as supported with the GDS-1000A.





What is the single feature lacking from most digital storage oscilloscopes? Adequate memory depth. Is the memory depth of your DSO large enough?


With 2M points of memory, the GDS-1000A has the capability to acquire far more waveform data compared to other DSOs in the same performance range.


The 1GSa/s sampling rate and 2M point memory plays an extremely powerful role for single-shot waveform capture. Properly set the trigger conditions to baby-sit the expected waveform. When the single-shot waveform is triggered and captured, you are able to check and see the single-shot event without losing any detailed information.