LeCroy Oscilloscope
LeCroy
CHAUVIN ARNOUX(샤빈 아녹스)
▶전원품질분석기
▶스코프메타/오실로스코프
▶열화상카메라
▶메가오옴/절연저항측정기
▶누설전류측정기
▶전류클램프센서
▶Rogowski coil sensor
▶Current clamps and sensors
IWATSU
Coherent Solutions
ODA(Power/ Load)
제전기 ( IONIZER )
Magna Power
NHR
APT
JENOPTIK
GWINSTEK
FLUKE
YOKOGAWA
AMETEK
NOISETECH
열충격시험기
Spellman
CHAUVIN ARNOUX(샤빈 아녹스) > 메가오옴/절연저항측정기
PRODUCTS CHAUVIN ARNOUX(샤빈 아녹스) > 메가오옴/절연저항측정기
CA6549

CA6549  5000V Megohmmeters


The Megohmmeter CA6549 is a fully automated 5000V graphical insulation tester. Selectable and programmable test voltage (40 to 5100V). Programmable temperature correction of resistance readings. The CA6549 is the only megohmmeter to offer both a graphical plot of the test right on the instruments, as well as a digital presentation of the test results. It has a large graphic display with five line alphanumeric display and graph. It also offers the ability to program up to three step voltage profiles, each containing up to five steps. The Model 5070 has an RS-232 port which provides the ability to configure the unit and run the test from a PC. Test results can be generated directly to a printer using the DataView® graphing and analysis software.

 

Features
  • True Megohmmeter® with selectable test voltage from 40 to 5100V, and fixed test voltages of 500V, 1000V, 2500V and 5000V
  • Insulation measurements from 30kΩ to 10TΩ
  • Automatic step voltage with programmable step and dwell times - three profiles can be stored, each with up to five steps
  • Programmable temperature compensation of resistance readings
  • Automatic calculation of DAR, PI and DD values
  • Direct measurement and display of Resistance, Test Voltage, Run Time, Capacitance and Leakage Current
  • Automatic test inhibition if live voltage is present
  • Automatic discharge and display of discharge voltage
  • Large graphic display with five line alphanumeric display and graph of all test results
  • Rugged weatherproof field case
  • RS-232 interface for direct printing of results
  • 128kB memory for storing field test data
  • Remote operation from PC
  • Includes DataView® software
  •  
    Applications
  • Test insulation on cables, transformers, motors, generators, insulators and wiring installations
  • High resistance or absorption tests
  • Spot reading tests
  • Timed resistance measurements
  • Dielectric Absorption Ratio (DAR) and Polarization Index (PI) tests
  • Multi-layer insulation testing (DD)
  • Test old or water damaged installations over long time runs
  • Motor insulation resistance measurements
  • Computer controlled production line testing
  • Predictive maintenance by storing results in PC for trend analysis
  • User selectable voltage testing to provide application specific testing
  • CA6549  5000V Megohmmeters
     

    The Megohmmeter CA6549 is a fully automated 5000V graphical insulation tester. Selectable and programmable test voltage (40 to 5100V). Programmable temperature correction of resistance readings. The CA6549 is the only megohmmeter to offer both a graphical plot of the test right on the instruments, as well as a digital presentation of the test results. It has a large graphic display with five line alphanumeric display and graph. It also offers the ability to program up to three step voltage profiles, each containing up to five steps. The Model 5070 has an RS-232 port which provides the ability to configure the unit and run the test from a PC. Test results can be generated directly to a printer using the DataView® graphing and analysis software.

     


    Features •True Megohmmeter® with selectable test voltage from 40 to 5100V, and fixed test voltages of 500V, 1000V, 2500V and 5000V
    •Insulation measurements from 30kΩ to 10TΩ
    •Automatic step voltage with programmable step and dwell times - three profiles can be stored, each with up to five steps
    •Programmable temperature compensation of resistance readings
    •Automatic calculation of DAR, PI and DD values
    •Direct measurement and display of Resistance, Test Voltage, Run Time, Capacitance and Leakage Current
    •Automatic test inhibition if live voltage is present
    •Automatic discharge and display of discharge voltage
    •Large graphic display with five line alphanumeric display and graph of all test results
    •Rugged weatherproof field case
    •RS-232 interface for direct printing of results
    •128kB memory for storing field test data
    •Remote operation from PC
    •Includes DataView® software
     
     
    Applications •Test insulation on cables, transformers, motors, generators, insulators and wiring installations
    •High resistance or absorption tests
    •Spot reading tests
    •Timed resistance measurements
    •Dielectric Absorption Ratio (DAR) and Polarization Index (PI) tests
    •Multi-layer insulation testing (DD)
    •Test old or water damaged installations over long time runs
    •Motor insulation resistance measurements
    •Computer controlled production line testing
    •Predictive maintenance by storing results in PC for trend analysis
    •User selectable voltage testing to provide application specific testing