MN series

설명

Give your tester intensity

The MN series of miniclamps (11 standard models) are designed to measure AC current from 10mA to 600A peak AC, with a wide bandwidth.

· IEC 1010.2.032-600V-Category III, for industrial environments

· non-slip guard, cable anti-pinch system

· clamping up to a diameter of 20mm

· utilisation with all multimeters, oscilloscopes, recorders…

There are various models of miniclamps to satisfy every requirement:

· single or dual calibre

· AC current (mA AC) or AC voltage (mV AC) or DC voltage (mV DC) output

· connection by safety sockets or hard-wired with banana plugs and also a model for oscilloscopes MN60 (clamp with BNC connector)

MODEL	input	output	connection	ratio	bandwidth	accuracy
MN08	0.5-240A	0.2A AC	jack	1000/1	40HZ-10KHZ	1%
MN09	0.5-240A	0.2A AC	lead	1000/1	40HZ-10KHZ	1%
MN10	0.5-240A	0.2A AC	jack	1000/1	40HZ-10KHZ	2%
MN11	0.5-240A	0.2A AC	lead	1000/1	40HZ-10KHZ	2%
MN12	0.5-240A	2V AC	jack	1A/10mV	40HZ-10KHZ	1%
MN13	0.5-240A	2V AC	lead	1A/10mV	40HZ-10KHZ	1%
MN14	0.5-240A	0.2V AC	jack	1A/1mV	40HZ-10KHZ	1%
MN15	0.5-240A	0.2V AC	lead	1A/1mV	40HZ-10KHZ	1%
MN21	0.1-240A	0.2A AC	lead	1000/1	40HZ-10KHZ	2%
MN23	0.1-240A	0.2V AC	lead	1A/10mV	40HZ-10KHZ	1.5%
MN38	0.1-24A	2VAC	jack	1A/100mV	40HZ-10KHZ	1%
	0.5-240A	2VAC	jack	1A/10mV	40HZ-10KHZ	1%
MN39	0.1-24A	2VAC	lead	1A/100mV	40HZ-10KHZ	1%
	0.5-240A	2VAC	lead	1A/10mV	40HZ-10KHZ	1%
MN60	0.1-60Apeak	2VAC	BNC	1A/100mV	40HZ-40KHZ	2%
	0.5-600Apeak	2VAC	BNC	1A/10mV	40HZ-40KHZ	1.5%
MN71	10mA-12A	1V AC	lead	1A/100mV	40HZ-10KHZ	1%
MN73	10mA-2,4A	2VAC	lead	1mA/1mV	40HZ-10KHZ	1%
	100mA-240A	2VAC	lead	1A/10mV	40HZ-10KHZ	2%
MN88	0.5-240A	20V DC	JACK	1A/100mV	40HZ-10KHZ	2%
MN89	0.5-240A	20V DC	lead	1A/100mV	40HZ-10KHZ	2%

For more information, please download the Spec Sheet which includes full technical specifications.